Share
All Products
![3734-10GTWL](https://www.powercoil.com.au/images/products/Loksert_Bulk_Bag_SS_Lock.jpg?i=2)
![3734-10GTWL](https://www.powercoil.com.au/images/products/Loksert_3732-38HDL.jpg?i=2)
![3734-10GTWL](https://www.powercoil.com.au/images/products/Loksert_Bulk_Bag_SS_Lock.jpg?i=2)
10G UNJF Thin Wall Internal Thread Locking Stainless Steel Insert
Part Number: | 3734-10GTWL |
Brand: | Loksert |
Barcode: | 9326518163152 |
Drill Diameter (inch): | I |
External Thread (inch): | 5/16 X 18 |
Installed Length (inch): | 0.310 |
Internal Thread Diameter (inch): | 10G |
Pitch (tpi): | 32 |
TPI: | 32 |
Drill Part No.: | 3632-I |
Tap Part No.: | 3632-5/16I |
About this item:
- 10G UNJF Thin Wall Internal Thread Locking Stainless Steel Insert
- Thin Wall UNJF Stainless Steel AISI303 Internal Thread Locking Loksert Insert.
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material - ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations - such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Loksert Internal thread locking inserts are designed to securely lock the installed fastener into the insert after only a few turns.
- The locking torque requirements are within the range specified by MIL-I-45914.
- The locking function maintains sufficient locking torque to prevent the fastener vibrating loose even after multiple installation and removal cycles.
- To ensure maximum performance UNC bolts should be Class 3A with the pitch diameter in the lower 50% of full tolerance. Metric bolts should be Class 4h.
- Bolts should be installed 4 turns after contact with the reduced diameter locking thread.
- Insufficient turns may not create the required torque and more turns will wear the locking thread prematurely.
- Available in metric sizes and inch sizes.